A Tackle Shop Guide to DFX IronGlide X8 PE Braid
DFX IronGlide X8 is an 8 carrier PE braid from AFN's Sea Pro range, on 300 m spools in hot pink, in PE 2.0 (30 lb), PE 3.0 (40 lb) and PE 4.0 (50 lb). Its IronGlide coating is a reinforced outer surface, made to stand up well to rubbing on rock, reef, timber and heavy cover while staying smooth enough to cast well.
It's made for fresh and saltwater fishing styles, and it suits anglers who fish close to structure, from spinning off Australian rock fishing platforms to working the inshore reefs.
A Note From Our Local Experts
"I was a little excited to stock this release from AFN Sea Pro. There are so many chartreuse braids on the market lately that many other colours are neglected, and this is the first braid I can remember that we have stocked that is hot pink! A great braid for the lady anglers who love pink, sure! But there is also a practical reason. Above the water, hot pink is easy to pick out, so you can keep an eye on your line. Below the surface, red is the first colour of light that water absorbs, and pink gets much of its colour from red, so it loses its brightness close to the surface and looks duller the deeper it goes."
- Ben Czulowski, Owner, Fishing Tackle Shop (Ocean Storm) | 20+ years industry experience

Ben in the shop with a spool of hot pink IronGlide X8 and the PE 4.0 (50 lb) packet.
What Matters on DFX IronGlide X8 Braid
Pro Tips for Spooling and Fishing IronGlide X8
- Fill to just below the lip: Leave a couple of millimetres of spool showing. An overfilled spool throws loose loops on the cast, and those loops become wind knots.
- Split a spool between two reels: Check your reel's braid capacity for the PE size you choose. If it holds around 150 m, one 300 m spool fills two reels.
- Wet the knot before you pull it tight: Friction from a dry knot cinching down can damage the fibres where they cross. A bit of saliva or water lets the turns slide into place.
- Set your drag well below the line's rating: Most anglers set drag at around a quarter to a third of the line's breaking strain. On PE 2.0, that's about 3.5 to 4.5 kg on a drag scale.
DFX IronGlide X8 Specifications and Reel Size Guide
| PE size | Breaking strain | Diameter | Mono equivalent (packet) | Typical spin reel size | Part no. | Barcode |
| PE 2.0 | 30 lb | 0.23 mm | About 10 lb | 6000 to 7000 | AC3222 | 9313000033222 |
| PE 3.0 | 40 lb | 0.30 mm | About 12 lb | 7000 to 8000 | AC3215 | 9313000033215 |
| PE 4.0 | 50 lb | 0.35 mm | About 15 lb | 8000 to 10000 | AC3208 | 9313000033208 |
Reel sizes come from our spinning reel size guide. Construction: 8 carrier (X8) solid core PE braid with IronGlide coating. Length: 300 m per spool. Colour: hot pink.
Frequently Asked Questions
Which DFX IronGlide X8 size should I choose?
Match it to the fish and the ground. PE 2.0 handles snapper over the inshore reefs, along with salmon and tailor off the rocks. Step up to PE 3.0 for kingfish and bonito, and to PE 4.0 for heavier rock spinning and offshore jigging, where you have to stop a fish before it reaches the reef. Close to our shop on the NSW south coast, salmon, tailor, kingfish and bonito pass through off the rocks from the Kiama rock pool to Blowhole Point and around Bass Point.
Can I use IronGlide X8 on a baitcaster or overhead reel?
On a baitcaster, how firmly you wind the braid on matters more than on a spin reel. A hard pulling fish can drag loosely packed line down into the layers below, and the next cast catches on it and overruns, so spool it on under firm, even pressure. PE 2.0 suits a baitcaster for heavier lure casting, while PE 3.0 and PE 4.0 match overhead reels for offshore jigging. Baitcasters and overheads aren't sized the way spin reels are, so go by the braid capacity printed on the reel for your PE size.
What leader should I use with IronGlide X8?
Run fluorocarbon at least as heavy as the braid: around 30 to 40 lb on PE 2.0, 40 to 50 lb on PE 3.0 and 50 to 60 lb on PE 4.0. Go heavier again when you're fishing hard against rock. An FG knot keeps the join slim enough to pass through the guides on the cast.
Will the pink colour fade?
Like any coloured braid, the dye lightens with sun and use, starting at the end that does the work. When that end turns pale, check it for fuzz or flat spots and cut those off. Then respool it end for end, and with 300 m on the spool you'll still have plenty of fresh pink to fish.
Choose your PE size above and add a spool of DFX IronGlide X8 to your cart.
AUD





